When it comes to construction in India, the goal is simple: construct long-term, sustainable and strong buildings that are not expensive to construct. From working on construction projects, one learns that every rupee that is saved is very important. FE 550D TMT Bars have been one of the biggest developments when it comes to efficient construction and reduction of costs.
Allow me to illustrate how these high-strength steel bars can reduce construction costs and at the same instance provide quality and durability for construction.
It will be important to understand what FE 550D TMT bars are before looking at how they help cut costs. TMT bars are high-yield strength bars that include FE 550D which is a grade of TMT steel bars.
The number “550” represents the minimum yield strength in newton per millimeter squared and the letter ‘D’ for ductility meaning these bars are flexible yet strong. These TMT bars are highly corrosion resistant and earthquake resistant thus suitable for use in construction in the different terrains of India.
Thus, it can be asked why FE 550D TMT bars are a revolution in the construction industry for cutting construction costs. Let me break it down:
The tensile strength of FE 550D TMT bars is one of the major contributing factors that assist in cost reduction. As a result of the increased strength of high-grade TMT bars in comparison to lower TMT bars, fewer quantities of steel bars are needed to impart the same degree of structural integrity.
For instance, instead of using 10 tons of lower-grade steel that may be required in a specific project, a lot of less FE 550D steel can do the job. The less material that you use while creating a product does not negatively affect the safety or the durability of the final product then you have automatically cut down on your expenses.
Another factor that increases the costs of a building is the long-term maintenance of the building. Of all the factors, corrosion is known to be the leading cause of steel structures to degrade especially in areas near the coast or areas that experience high humidity. Time and again, I have witnessed how losses are made through having to repair and maintain the corrosive effects which eat heavily on the profits.
Thus, if a building uses FE 550D TMT bars for its frame then it is going to be in a better position to stand the test of time and for repairs and other related costs to be minimized. In the long run, this translates into big savings.
Time is money, especially in construction. The use of FE 550D TMT bars is easier because the bars are ductile and flexible. This means that the amount of time used in cutting, bending and welding of the bars is greatly reduced hence the construction time. This makes it possible for a project to be completed in less time hence a reduction in the number of man-hours used and fewer delays.
Requirements for safety cannot be overemphasized in any construction project and FE 550D TMT bars offer a great workout in terms of earthquake resistance. The structures that are created with these bars are stronger during the earthquakes and this is good in the regions of India often experiencing earthquakes.
I was involved in a project in a seismically active area, it gave me confidence that the structure would resist the tremors with the help of FE 550D TMT bars. What I did not anticipate was the fact that this would also result in low insurance premiums because the probability of loss was low.
In construction one of the greatest challenges is to make a structure stand for decades and even more. FE 550D TMT bars are very strong and a good investment for any construction project that is undertaken. Though the cost of FE 550D bars may be slightly higher as compared to other lower-quality steel bars, the benefits that one is going to get in the future are invaluable.
Greater durability results in a decrease in the frequency of replacement or repair of the steel reinforcement thus lowering the long-term costs. I have always considered this as a form of investment to understand that the houses constructed with FE 550D bars are going to be durable for generations.
In as much as choosing the right TMT bars for your construction SEL Tiger TMT bars are among the best manufacturers. It’s a FE 550D TMT bars brand that offers unmatched quality TMT bars in terms of strength, corrosion resistance, and ductility. So while working with this brand, you are not only getting the best steel but you are getting the best after-sale service that guarantees the safety, durability and constructiveness of your structure at the market price.
TMT 550D bars are superior to 500D in terms of tensile strength, and they are more applicable to big structure applications that require significant loads. Nevertheless, both the grades have good ductility but 550D has more advantages in case of heavy applications.
The “D” in 550D means “ductility” and it refers to the capacity of the bar to bend as many times as possible without snapping. This makes 550D bars especially useful in regions that are most likely to be affected by earthquakes or any other dynamic loads.
It has a yield point of 550N /mm², this means that 550D steel can only endure this level of stress before sustaining a permanent set. Thanks to this high yield strength, the material is suitable for the construction of very strong structures.
SEL Tiger is a reliable TMT bar brand that meets the prescribed international standards for high-quality corrosion resistance, ductility and strength.
